Great job.

Leonard

Hi, wanted to say you're doing an excellent job with the batocera OS and your site is very easy and pleasant to navigate.

I'm starting to much prefer coming here and using this retro system rather than the one from retropie, as their whole idea of sticking to one maker board seems very limiting.

Speaking of such are you aware of the new UDOO X86?

http://www.udoo.org/udoo-x86/

Apparently, it has been seen playing a version of Lakka. I asked via youtube and they confirmed it was the PC image release, just wondering would that also be the case with your PC release?

I plan on ordering it soon but much prefer to use your operating system then Lakka as it's limited with the number of systems available.

Just one final question do you plan on expanding your systems lists eventually?

nadenislamarre

it's a x86, batocera will work on it.
i plan to add still a lot of things, but it takes times.

NickDG

Hi, I can confirm im unable to get Batocera to work on the Udoo x86 board, i can only get it to boot off SD card while in USB card reader, but if i place the SD card in the microSD card slot the boot hangs, also the board has a irremovable EMMC storage, i tried to Sudo DD the data from the SD card over to the EMMC but no luck.

anything else i can try ?

NickDG

removed console=tty3 quiet loglevel=0 im getting the below error

mount: mounting LABEL=RECALBOX on /boot_root failed: no such file or directory
waiting for the root device

hope that helps to resolve the issue im getting

nadenislamarre

hi.
ok. it means that the sd card driver is not integrated to the boot part.
can you do the following :

start on a live ubuntu image.
open a terminal and type lsmod
plug a sd card
type lsmod
give me the list of new items since the first lsmod
type dmesg and give me the last lines

if you've not ubuntu image, in fact, boot as you managed to do, ie with the usb converter, and do the same thing.
i need to know which drivers are required at boot.
note that you can press f1 when on the menu to confirm that once booted on batocera, you're sdcard is visible (and that's only at the boot part that's not visible)

NickDG

i assume you need me to do the same when trying to boot off the onboard EMMC chip ?

NickDG

ok well when i write the image to the on-board EMMC and boot off the EMMC i'm getting the below error

No Bootable device -- insert boot disk and press any key

so i then tried to boot From File,
First Screen Options
RECALBOX,
[PciRoot(0x0)/Pci(0x10,0x0)/Ctrl(0x0)/Unit(0x0)/HD(1,MBR, 0x82AD2043, 0x258000)
I press Enter

Second Screen Options (The ---> displays what option i get if i choose that root option)
<boot> ---> <. > or <.. > or <grub> ---> Blank
<EFI> ---> <. > or <.. > or <BOOT> ---> bootx64.efi
I press Enter

then screen goes black and flashes Recalbox in small white lettering in the top left corner then screen and goes blank and makes no move after, iv left it for hours like that

I then removed console=tty3 quiet loglevel=0, to see if i get any error or display after that , but nothing screen just goes black and stays like that

NickDG

Hi,

when i do the lsmod command with and with out the SD card plugged in i see no difference

this is what i get when i plug the SD card in and type dmesg
[ 700.021788] mmc1:card aaaa removed
[ 705.214494] mmc1:new ultra high speed DDR50 SDHC card at address aaaa
[ 705.216021] mmcblk1: mmc1:aaaa SU32G 29.7 GiB
[ 700.217452] mmcblk1: p1

I hope this makes sense to you 🙂, its all french to me. id really love get your Betacera OS running off the onboard EMMC , as this little board is quiet the best and perfect to run as a restro console, iv managed to test it on the board with a USB stick and runs super smooth

NickDG

when i go to Gparted i see the below devices listed

/dev/mmcblk0 (this is the onboard 32Gb EMMC card)
/dev/mmcblk1 (this is my 32Gb SD card in the SD slot)
/dev/sda (this is my 1Tb SATA Drive connected to the board)
/dev/sdb (this is my 16Gb USB stick connected)

nadenislamarre

"I then removed console=tty3 quiet loglevel=0"
have you removed it on the 2 grub files ?
if nothing is displayed, that's strange.
for the emmc, i don't know if something special to do is required. on the xu4, the emmc is known to work with the same image as the sdcard.

on the second screen, can you choose "bootx64.efi" instead of "blank" before pressing enter ?

NickDG

i think i might of missed the second grub file, iv installed your on my HDD connected to the board and all is working fine, ill try removing tty3 line from both grub files and boot from emmc chip again , see if i get an output

when i choose the bootx64.efi file so it boots off that file, that's when i get the black screen with the recalbox in white in the top left , then the screen goes blank/black and nothing happens after that, i think that's cause i didn't delete the line in the second grub file, ill update again later or tomorrow

NickDG

ok i removed the line console=tty3 quiet loglevel=0 from both grub files on the emmc chip, and booted off the bootx64.efi file, im getting the below / same error as when i try and boot from the SD card when its in the SD card slot on the board.

mount: mounting LABEL=RECALBOX on /boot_root failed: no such file or directory
waiting for the root device

so it looks like its a driver issue for both SD card and emmc booting, let me know if you require anything else. 🙂

nadenislamarre

can you send me the content of dmesg and lsmod once booted please so that i found which drivers are required.

NickDG

do you want me to boot of Ubunto or SSH to Batocera ?

nadenislamarre

batocera.

NickDG

lsmod:

Module Size Used by Not tainted
hid_sony 24576 0
ff_memless 16384 1 hid_sony
hidp 24576 1
ccm 20480 3
bnep 20480 2
xt_connmark 16384 2
iptable_nat 16384 0
nf_conntrack_ipv4 16384 3
nf_defrag_ipv4 16384 1 nf_conntrack_ipv4
nf_nat_ipv4 16384 1 iptable_nat
nf_nat 28672 1 nf_nat_ipv4
nf_conntrack 114688 4 xt_connmark,nf_conntrack_ipv4,nf_nat_ipv4,nf_nat
iptable_mangle 16384 1
cdc_acm 28672 0
snd_hda_codec_hdmi 45056 1
snd_hda_codec_realtek 86016 1
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek
arc4 16384 2
iwlmvm 356352 0
joydev 20480 0
input_leds 16384 0
mac80211 770048 1 iwlmvm
iwlwifi 225280 1 iwlmvm
cfg80211 585728 3 iwlmvm,mac80211,iwlwifi
r8169 81920 0
mmc_block 40960 0
mii 16384 1 r8169
hid_generic 16384 0
intel_rapl 20480 0
intel_powerclamp 16384 0
coretemp 16384 0
kvm_intel 192512 0
kvm 585728 1 kvm_intel
irqbypass 16384 1 kvm
punit_atom_debug 16384 0
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
aesni_intel 167936 7
aes_x86_64 20480 1 aesni_intel
lrw 16384 1 aesni_intel
glue_helper 16384 1 aesni_intel
ablk_helper 16384 1 aesni_intel
snd_hda_intel 36864 2
cryptd 24576 3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_codec 135168 4 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel
snd_hda_core 81920 5 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec
snd_hwdep 16384 1 snd_hda_codec
btusb 45056 0
snd_pcm 110592 5 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
btrtl 16384 1 btusb
btbcm 16384 1 btusb
btintel 16384 1 btusb
snd_timer 32768 1 snd_pcm
bluetooth 552960 31 hidp,bnep,btusb,btrtl,btbcm,btintel
i915 1236992 4
lpc_ich 24576 0
mei_txe 20480 0
snd 86016 11 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 16384 1 snd
usbhid 53248 0
mei 102400 1 mei_txe
shpchp 36864 0
hid 122880 4 hid_sony,hidp,hid_generic,usbhid
fjes 28672 0
dwc3 102400 0
dw_dmac 16384 0
udc_core 53248 1 dwc3
i2c_designware_platform 16384 0
sdhci_acpi 16384 0
i2c_designware_core 20480 1 i2c_designware_platform
spi_pxa2xx_platform 24576 0
ulpi 16384 1 dwc3
sdhci 45056 1 sdhci_acpi
8250_dw 16384 0
pwm_lpss_platform 16384 0
tpm_crb 16384 0
pwm_lpss 16384 1 pwm_lpss_platform
soc_button_array 16384 0
video 40960 1 i915
pinctrl_cherryview 32768 3
mac_hid 16384 0

NickDG

dmesg:

[ 0.000000] Linux version 4.9.0 (nicolas@setsouko) (gcc version 5.4.0 (Buildroot 2017.05-git-03351-gfe76b8a) ) #1 SMP Sun Jun 4 22:01:28 CEST 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/linux label=RECALBOX console=tty3 quiet loglevel=0 vt.global_cursor_default=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005a4befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005a4bf000-0x000000005aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000005aebf000-0x000000005bfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005bfbf000-0x000000005bffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005bfff000-0x000000005bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005e000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: SECO UDOO x86/UDOO x86, BIOS 1.01 02/20/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 040000000 mask FE0000000 write-back
[ 0.000000] 3 base 05E000000 mask FFE000000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask F80000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x5c000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8aac00098000] 98000 size 24576
[ 0.000000] BRK [0x1b445f000, 0x1b445ffff] PGTABLE
[ 0.000000] BRK [0x1b4460000, 0x1b4460fff] PGTABLE
[ 0.000000] BRK [0x1b4461000, 0x1b4461fff] PGTABLE
[ 0.000000] BRK [0x1b4462000, 0x1b4462fff] PGTABLE
[ 0.000000] BRK [0x1b4463000, 0x1b4463fff] PGTABLE
[ 0.000000] BRK [0x1b4464000, 0x1b4464fff] PGTABLE
[ 0.000000] BRK [0x1b4465000, 0x1b4465fff] PGTABLE
[ 0.000000] BRK [0x1b4466000, 0x1b4466fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37ee4000-0x37f69fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x000000005BFFE120 0000A4 (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x000000005BFF9000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000005BFEB000 008B44 (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000005BFAB000 000040
[ 0.000000] ACPI: UEFI 0x000000005BFFD000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: TCPA 0x000000005BFFC000 000032 (v02 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000005BFFA000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000005BFF8000 000084 (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000005BFF7000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x000000005BFF6000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x000000005BFF5000 0001C4 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: WDRT 0x000000005BFF4000 000047 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000005BFEA000 0007A1 (v01 INSYDE CpuPm 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000005BFE9000 0002B5 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000005BFE8000 0001DE (v01 INSYDE ApTst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000005BFE7000 000469 (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x000000005BFE6000 000034 (v03 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: CSRT 0x000000005BFE5000 00014C (v00 INSYDE INSYDE 00000005 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000005BFE4000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27fff7000-0x27fffafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000005a4befff]
[ 0.000000] node 0: [mem 0x000000005bfff000-0x000000005bffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[ 0.000000] On node 0 totalpages: 1942621
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5715 pages used for memmap
[ 0.000000] DMA32 zone: 365760 pages, LIFO batch:31
[ 0.000000] Normal zone: 24576 pages used for memmap
[ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000005ec00000-0x000000007ebfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5a4bf000-0x5aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5aebf000-0x5bfbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5bfbf000-0x5bffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5c000000-0x5dffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5e000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff8aae7fc00000 s107736 r8192 d31528 u524288
[ 0.000000] pcpu-alloc: s107736 r8192 d31528 u524288 alloc=12097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1912245
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/linux label=RECALBOX console=tty3 quiet loglevel=0 vt.global_cursor_default=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7559448K/7770484K available (8963K kernel code, 1578K rwdata, 4136K rodata, 1572K init, 1280K bss, 211036K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty3] enabled
[ 0.000000] tsc: Detected 1600.000 MHz processor
[ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[ 0.000041] pid_max: default: 32768 minimum: 301
[ 0.000054] ACPI: Core revision 20160831
[ 0.013316] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.013365] Security Framework initialized
[ 0.013368] Yama: becoming mindful.
[ 0.013390] AppArmor: AppArmor initialized
[ 0.014272] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.018581] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.020571] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020588] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.021139] CPU: Physical Processor ID: 0
[ 0.021142] CPU: Processor Core ID: 0
[ 0.021148] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.021149] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.021159] mce: CPU supports 6 MCE banks
[ 0.021169] CPU0: Thermal monitoring enabled (TM1)
[ 0.021178] process: using mwait in idle threads
[ 0.021184] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.021186] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[ 0.021696] Freeing SMP alternatives memory: 32K (ffffffffb6315000 - ffffffffb631d000)
[ 0.024291] ftrace: allocating 35265 entries in 138 pages
[ 0.048315] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.048318] smpboot: Max logical packages: 1
[ 0.050316] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.090029] TSC deadline timer enabled
[ 0.090034] smpboot: CPU0: Intel(R) Pentium(R) CPU N3710 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[ 0.090043] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.090073] ... version: 3
[ 0.090075] ... bit width: 40
[ 0.090076] ... generic registers: 2
[ 0.090077] ... value mask: 000000ffffffffff
[ 0.090079] ... max period: 0000007fffffffff
[ 0.090080] ... fixed-purpose events: 3
[ 0.090081] ... event mask: 0000000700000003
[ 0.091862] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.092168] x86: Booting SMP configuration:
[ 0.092171] .... node #0, CPUs: #1 #2 #3
[ 0.332411] x86: Booted up 1 node, 4 CPUs
[ 0.332416] smpboot: Total of 4 processors activated (12805.59 BogoMIPS)
[ 0.334473] devtmpfs: initialized
[ 0.334621] x86/mm: Memory block size: 128MB
[ 0.343359] evm: security.selinux
[ 0.343361] evm: security.SMACK64
[ 0.343362] evm: security.SMACK64EXEC
[ 0.343363] evm: security.SMACK64TRANSMUTE
[ 0.343364] evm: security.SMACK64MMAP
[ 0.343365] evm: security.ima
[ 0.343366] evm: security.capability
[ 0.343516] PM: Registering ACPI NVS region [mem 0x5aebf000-0x5bfbefff] (17825792 bytes)
[ 0.344187] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.344281] pinctrl core: initialized pinctrl subsystem
[ 0.344529] RTC time: 11:30:03, date: 06/13/17
[ 0.344758] NET: Registered protocol family 16
[ 0.354253] cpuidle: using governor ladder
[ 0.370271] cpuidle: using governor menu
[ 0.370274] PCCT header not found.
[ 0.370367] ACPI: bus type PCI registered
[ 0.370371] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.370513] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.370517] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.370530] PCI: Using configuration type 1 for base access
[ 0.386670] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.387269] ACPI: Added OSI(Module Device)
[ 0.387271] ACPI: Added OSI(Processor Device)
[ 0.387273] ACPI: Added OSI(3.0 SCP Extensions)
[ 0.387275] ACPI: Added OSI(Processor Aggregator Device)
[ 0.387587] ACPI: Executed 5 blocks of module-level executable AML code
[ 0.399453] ACPI: Dynamic OEM Table Load:
[ 0.399471] ACPI: SSDT 0xFFFF8AAE76B38800 0006FD (v01 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.399707] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.399925] ACPI: Dynamic OEM Table Load:
[ 0.399937] ACPI: SSDT 0xFFFF8AAE76580C00 0003CA (v01 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.400284] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.400844] ACPI: Dynamic OEM Table Load:
[ 0.400855] ACPI: SSDT 0xFFFF8AAE76576000 0001E0 (v01 PmRef ApIst 00003000 INTL 20160527)
[ 0.401071] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.401256] ACPI: Dynamic OEM Table Load:
[ 0.401266] ACPI: SSDT 0xFFFF8AAE76550100 0000C9 (v01 PmRef ApCst 00003000 INTL 20160527)
[ 0.401415] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.403431] ACPI: Interpreter enabled
[ 0.403477] ACPI: (supports S0 S3 S4 S5)
[ 0.403480] ACPI: Using IOAPIC for interrupt routing
[ 0.403551] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.405623] ACPI: Power Resource [USBC] (on)
[ 0.414511] ACPI: Power Resource [ID3C] (off)
[ 0.420939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.420950] acpi PNP0A08:00: OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.421072] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.421096] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.421340] acpi PNP0A08:00: host bridge window expanded to [mem 0x80000000-0xdfffffff window]; [mem 0x80000000-0xdfffffff window] ignored
[ 0.421779] PCI host bridge to bus 0000:00
[ 0.421784] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.421787] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.421790] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.421793] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.421796] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.421798] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.421801] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.421804] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.421808] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.421822] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.422109] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 0.422134] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.422149] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x9fffffff 64bit pref]
[ 0.422160] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.422418] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[ 0.422482] pci 0000:00:13.0: reg 0x20: [io 0x2060-0x207f]
[ 0.422495] pci 0000:00:13.0: reg 0x24: [mem 0xa1527000-0xa15277ff]
[ 0.422561] pci 0000:00:13.0: PME# supported from D3hot
[ 0.422754] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.422784] pci 0000:00:14.0: reg 0x10: [mem 0xa1500000-0xa150ffff 64bit]
[ 0.422886] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.423027] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.423123] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.423147] pci 0000:00:1a.0: reg 0x10: [mem 0xa1400000-0xa14fffff]
[ 0.423160] pci 0000:00:1a.0: reg 0x14: [mem 0xa1300000-0xa13fffff]
[ 0.423258] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.423521] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 0.423554] pci 0000:00:1b.0: reg 0x10: [mem 0xa1510000-0xa1513fff 64bit]
[ 0.423669] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.423789] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.423880] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.423992] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.424105] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.424195] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[ 0.424309] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.424431] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.424523] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
[ 0.424636] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.424752] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.424851] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.425163] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 0.425217] pci 0000:00:1f.3: reg 0x10: [mem 0xa151c000-0xa151c01f]
[ 0.425334] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
[ 0.425759] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.425902] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.425931] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.425970] pci 0000:02:00.0: reg 0x18: [mem 0xa1200000-0xa1200fff 64bit]
[ 0.425994] pci 0000:02:00.0: reg 0x20: [mem 0xa1000000-0xa1003fff 64bit pref]
[ 0.426131] pci 0000:02:00.0: supports D1 D2
[ 0.426134] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426214] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.436417] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.436423] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.436429] pci 0000:00:1c.2: bridge window [mem 0xa1200000-0xa12fffff]
[ 0.436438] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa10fffff 64bit pref]
[ 0.436584] pci 0000:03:00.0: [8086:24fb] type 00 class 0x028000
[ 0.436638] pci 0000:03:00.0: reg 0x10: [mem 0xa1100000-0xa1101fff 64bit]
[ 0.436903] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.436994] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.448420] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.448429] pci 0000:00:1c.3: bridge window [mem 0xa1100000-0xa11fffff]
[ 1.480116] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) 7
[ 1.480268] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15)
[ 1.480422] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15)
[ 1.480571] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15)
[ 1.480717] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15)
[ 1.480864] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) 7
[ 1.481011] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15)
[ 1.481159] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.482510] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 1.482905] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.482909] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.482915] vgaarb: loaded
[ 1.482917] vgaarb: bridge control possible 0000:00:02.0
[ 1.483409] SCSI subsystem initialized
[ 1.483526] libata version 3.00 loaded.
[ 1.483578] ACPI: bus type USB registered
[ 1.483620] usbcore: registered new interface driver usbfs
[ 1.483642] usbcore: registered new interface driver hub
[ 1.483685] usbcore: registered new device driver usb
[ 1.483958] PCI: Using ACPI for IRQ routing
[ 1.486594] PCI: pci_cache_line_size set to 64 bytes
[ 1.486675] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 1.486679] e820: reserve RAM buffer [mem 0x5a4bf000-0x5bffffff]
[ 1.486908] NetLabel: Initializing
[ 1.486911] NetLabel: domain hash size = 128
[ 1.486912] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.486938] NetLabel: unlabeled traffic allowed by default
[ 1.487203] clocksource: Switched to clocksource refined-jiffies
[ 1.501837] VFS: Disk quotas dquot_6.6.0
[ 1.501880] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.502021] AppArmor: AppArmor Filesystem Enabled
[ 1.502145] pnp: PnP ACPI init
[ 1.502346] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.502351] system 00:00: [io 0x0400-0x047f] has been reserved
[ 1.502354] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 1.502362] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.504876] system 00:01: [mem 0xa152a000-0xa152afff] has been reserved
[ 1.504880] system 00:01: [mem 0xa1528000-0xa1528fff] has been reserved
[ 1.504884] system 00:01: [mem 0xa1521000-0xa1521fff] has been reserved
[ 1.504887] system 00:01: [mem 0xa151f000-0xa151ffff] has been reserved
[ 1.504891] system 00:01: [mem 0xa151d000-0xa151dfff] has been reserved
[ 1.504894] system 00:01: [mem 0xa1526000-0xa1526fff] has been reserved
[ 1.504898] system 00:01: [mem 0xa1524000-0xa1524fff] has been reserved
[ 1.504905] system 00:01: [mem 0xa1522000-0xa1522fff] has been reserved
[ 1.504912] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.505107] system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved
[ 1.505112] system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
[ 1.505115] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[ 1.505118] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
[ 1.505122] system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
[ 1.505125] system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
[ 1.505129] system 00:02: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 1.505132] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 1.505136] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.505142] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.505479] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.505819] pnp: PnP ACPI: found 4 devices
[ 1.515017] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.515044] clocksource: Switched to clocksource acpi_pm
[ 1.515073] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1.515079] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 1.515083] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 1.515117] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 1.515121] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 1.515125] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.515128] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.515132] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1.515135] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1.515148] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa1600000-0xa17fffff]
[ 1.515158] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa1800000-0xa19fffff 64bit pref]
[ 1.515164] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 1.515170] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.515176] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.515184] pci 0000:00:1c.0: bridge window [mem 0xa1600000-0xa17fffff]
[ 1.515190] pci 0000:00:1c.0: bridge window [mem 0xa1800000-0xa19fffff 64bit pref]
[ 1.515199] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 1.515204] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 1.515210] pci 0000:00:1c.2: bridge window [mem 0xa1200000-0xa12fffff]
[ 1.515216] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa10fffff 64bit pref]
[ 1.515225] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.515232] pci 0000:00:1c.3: bridge window [mem 0xa1100000-0xa11fffff]
[ 1.515245] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.515248] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 1.515251] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 1.515254] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.515257] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.515260] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.515263] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 1.515266] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[ 1.515269] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 1.515272] pci_bus 0000:01: resource 1 [mem 0xa1600000-0xa17fffff]
[ 1.515275] pci_bus 0000:01: resource 2 [mem 0xa1800000-0xa19fffff 64bit pref]
[ 1.515278] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.515281] pci_bus 0000:02: resource 1 [mem 0xa1200000-0xa12fffff]
[ 1.515284] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa10fffff 64bit pref]
[ 1.515287] pci_bus 0000:03: resource 1 [mem 0xa1100000-0xa11fffff]
[ 1.515470] NET: Registered protocol family 2
[ 1.515833] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.516160] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.516554] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.516650] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.516737] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.516910] NET: Registered protocol family 1
[ 1.516947] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.518853] PCI: CLS 64 bytes, default 64
[ 1.518989] Trying to unpack rootfs image as initramfs...
[ 1.536607] Freeing initrd memory: 536K (ffff8aac37ee4000 - ffff8aac37f6a000)
[ 1.536613] PCI-DMA: Using software bounce buffering for IO (SWIOTL😎
[ 1.536617] software IO TLB [mem 0x564bf000-0x5a4bf000] (64M😎 mapped at [ffff8aac564bf000-ffff8aac5a4befff]
[ 1.537002] Scanning for low memory corruption every 60 seconds
[ 1.537831] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.537880] audit: initializing netlink subsys (disabled)
[ 1.537917] audit: type=2000 audit(1497353403.528:1): initialized
[ 1.538679] Initialise system trusted keyrings
[ 1.538865] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.542935] zbud: loaded
[ 1.543942] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.544459] fuse init (API version 7.26)
[ 1.547761] Key type asymmetric registered
[ 1.547764] Asymmetric key parser 'x509' registered
[ 1.547852] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.547928] io scheduler noop registered
[ 1.547930] io scheduler deadline registered (default)
[ 1.547948] io scheduler cfq registered
[ 1.548712] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.548724] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.548793] intel_idle: MWAIT substates: 0x33000020
[ 1.548796] intel_idle: v0.4.1 model 0x4C
[ 1.549125] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.549286] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:01/input/input0
[ 1.549294] ACPI: Power Button [PWR2]
[ 1.549382] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.549387] ACPI: Sleep Button [SLPB]
[ 1.549477] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.549482] ACPI: Power Button [PWRF]
[ 1.554168] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.554172] ACPI: Thermal Zone [TZ00] (43 C)
[ 1.627690] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.627694] ACPI: Thermal Zone [TZPO] (43 C)
[ 1.627792] GHES: HEST is not enabled!
[ 1.628545] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.652183] Linux agpgart interface v0.103
[ 1.652524] [drm] Initialized
[ 1.668551] brd: module loaded
[ 1.676759] loop: module loaded
[ 1.677206] ahci 0000:00:13.0: version 3.0
[ 1.687830] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.687840] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
[ 1.689508] scsi host0: ahci
[ 1.690489] scsi host1: ahci
[ 1.690611] ata1: SATA max UDMA/133 abar m2048@0xa1527000 port 0xa1527100 irq 115
[ 1.690615] ata2: SATA max UDMA/133 abar m2048@0xa1527000 port 0xa1527180 irq 115
[ 1.694016] scsi host2: pata_legacy
[ 1.694177] ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 2.007397] ata1: SATA link down (SStatus 4 SControl 300)
[ 2.007440] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.061926] ata2.00: ATA-8: TOSHIBA MK1059GSM, GL001U, max UDMA/100
[ 2.061931] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.063918] ata2.00: configured for UDMA/100
[ 2.065160] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK1059GS 1U PQ: 0 ANSI: 5
[ 2.100344] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 Gi😎
[ 2.100349] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 2.100469] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.101041] sd 1:0:0:0: [sda] Write Protect is off
[ 2.101054] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.101246] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.152853] sda: sda1 sda2
[ 2.154253] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.156214] scsi host3: pata_legacy
[ 2.156386] ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 2.316570] libphy: Fixed MDIO Bus: probed
[ 2.316574] tun: Universal TUN/TAP device driver, 1.6
[ 2.316575] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.317426] PPP generic driver version 2.4.2
[ 2.318216] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.318231] ehci-pci: EHCI PCI platform driver
[ 2.318284] ehci-platform: EHCI generic platform driver
[ 2.318325] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.318331] ohci-pci: OHCI PCI platform driver
[ 2.318367] ohci-platform: OHCI generic platform driver
[ 2.318385] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.318822] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.318852] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.320044] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810
[ 2.320066] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.320342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.320346] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.320349] usb usb1: Product: xHCI Host Controller
[ 2.320353] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
[ 2.320362] usb usb1: SerialNumber: 0000:00:14.0
[ 2.321492] hub 1-0:1.0: USB hub found
[ 2.321530] hub 1-0:1.0: 7 ports detected
[ 2.323447] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.323458] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.323583] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.323588] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.323593] usb usb2: Product: xHCI Host Controller
[ 2.323597] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
[ 2.323599] usb usb2: SerialNumber: 0000:00:14.0
[ 2.324870] hub 2-0:1.0: USB hub found
[ 2.324899] hub 2-0:1.0: 6 ports detected
[ 2.326849] usbcore: registered new interface driver uas
[ 2.326904] usbcore: registered new interface driver usb-storage
[ 2.326926] usbcore: registered new interface driver ums-alauda
[ 2.326941] usbcore: registered new interface driver ums-cypress
[ 2.326957] usbcore: registered new interface driver ums-datafab
[ 2.326980] usbcore: registered new interface driver ums_eneub6250
[ 2.327000] usbcore: registered new interface driver ums-freecom
[ 2.327070] usbcore: registered new interface driver ums-isd200
[ 2.327088] usbcore: registered new interface driver ums-jumpshot
[ 2.327103] usbcore: registered new interface driver ums-karma
[ 2.327126] usbcore: registered new interface driver ums-onetouch
[ 2.327149] usbcore: registered new interface driver ums-realtek
[ 2.327174] usbcore: registered new interface driver ums-sddr09
[ 2.327189] usbcore: registered new interface driver ums-sddr55
[ 2.327208] usbcore: registered new interface driver ums-usbat
[ 2.327285] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.567388] tsc: Refined TSC clocksource calibration: 1599.947 MHz
[ 2.567401] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170ff2fc09b, max_idle_ns: 440795267654 ns
[ 3.383374] i8042: No controller found
[ 3.384059] mousedev: PS/2 mouse device common for all mice
[ 3.385432] rtc_cmos 00:03: RTC can wake from S4
[ 3.385933] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.385997] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[ 3.386021] i2c /dev entries driver
[ 3.386219] device-mapper: uevent: version 1.0.3
[ 3.386635] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 3.386646] intel_pstate: Intel P-state driver initializing
[ 3.388132] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.391862] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.392802] NET: Registered protocol family 10
[ 3.393327] NET: Registered protocol family 17
[ 3.393343] Key type dns_resolver registered
[ 3.393853] microcode: sig=0x406c4, pf=0x1, revision=0x40a
[ 3.393966] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.394755] registered taskstats version 1
[ 3.394763] Loading compiled-in X.509 certificates
[ 3.398207] Loaded X.509 cert 'Build time autogenerated kernel key: f3b7a9c3e8f01bcc4b9d18fff1c927624e25bacd'
[ 3.398241] zswap: loaded using pool lzo/zbud
[ 3.421741] Key type big_key registered
[ 3.422536] Key type trusted registered
[ 3.422929] Key type encrypted registered
[ 3.422933] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.422936] ima: No TPM chip found, activating TPM-bypass!
[ 3.422972] evm: HMAC attrs: 0x1
[ 3.423562] Magic number: 5:619:529
[ 3.424052] rtc_cmos 00:03: setting system clock to 2017-06-13 11:30:06 UTC (1497353406)
[ 3.424408] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.424409] EDD information not available.
[ 3.424512] PM: Hibernation image not present or could not be loaded.
[ 3.428015] Freeing unused kernel memory: 1572K (ffffffffb618c000 - ffffffffb6315000)
[ 3.428019] Write protecting the kernel read-only data: 16384k
[ 3.429993] Freeing unused kernel memory: 1260K (ffff8aadb38c5000 - ffff8aadb3a00000)
[ 3.439340] Freeing unused kernel memory: 2008K (ffff8aadb3e0a000 - ffff8aadb4000000)
[ 3.443027] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 3.591688] usb 1-3: New USB device found, idVendor=045e, idProduct=0745
[ 3.591693] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.591696] usb 1-3: Product: Microsoft® 2.4GHz Transceiver v8.0
[ 3.591699] usb 1-3: Manufacturer: Microsoft
[ 3.591844] clocksource: Switched to clocksource tsc
[ 3.687630] random: fast init done
[ 3.715123] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 3.863038] usb 1-4: New USB device found, idVendor=8087, idProduct=0aba
[ 3.863042] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.863044] usb 1-4: Product: UDOO X86
[ 3.863045] usb 1-4: Manufacturer: UDOO
[ 3.863047] usb 1-4: SerialNumber: K71942236
[ 3.983297] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 4.124963] usb 1-5: New USB device found, idVendor=8087, idProduct=0aa7
[ 4.124966] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.813969] udevd[234]: starting version 3.2.2
[ 4.924260] udevd[235]: starting eudev-3.2.2
[ 5.139049] sdhci: Secure Digital Host Controller Interface driver
[ 5.139051] sdhci: Copyright(c) Pierre Ossman
[ 5.143164] 8086228A:00: ttyS4 at MMIO 0xa1520000 (irq = 39, base_baud = 2764800) is a 16550A
[ 5.151164] 8086228A:01: ttyS5 at MMIO 0xa151e000 (irq = 40, base_baud = 2764800) is a 16550A
[ 5.213940] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 5.245741] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 5.275802] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 5.306258] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.315277] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 5.342744] mmc0: new HS200 MMC card at address 0001
[ 5.474398] usbcore: registered new interface driver usbhid
[ 5.474400] usbhid: USB HID core driver
[ 5.605087] Bluetooth: Core ver 2.22
[ 5.605120] NET: Registered protocol family 31
[ 5.605121] Bluetooth: HCI device and connection manager initialized
[ 5.605127] Bluetooth: HCI socket layer initialized
[ 5.605130] Bluetooth: L2CAP socket layer initialized
[ 5.605139] Bluetooth: SCO socket layer initialized
[ 5.664198] usbcore: registered new interface driver btusb
[ 5.674478] Bluetooth: hci0: read Intel version: 370810225019140f20
[ 5.674481] Bluetooth: hci0: Intel device is already patched. patch num: 20
[ 5.889815] SSE version of gcm_enc/dec engaged.
[ 6.059994] intel_rapl: Found RAPL domain package
[ 6.060003] intel_rapl: Found RAPL domain core
[ 6.342974] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:0745.0001/input/input3
[ 6.348126] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 6.348294] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.352211] [drm] Memory usable by graphics device = 4096M
[ 6.352215] [drm] Replacing VGA console driver
[ 6.354458] Console: switching to colour dummy device 80x25
[ 6.354979] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.354981] [drm] Driver supports precise vblank timestamp query.
[ 6.374243] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.393860] mmcblk0: mmc0:0001 DF4032 29.1 GiB
[ 6.393991] mmcblk0boot0: mmc0:0001 DF4032 partition 1 4.00 MiB
[ 6.394124] mmcblk0boot1: mmc0:0001 DF4032 partition 2 4.00 MiB
[ 6.394232] mmcblk0rpmb: mmc0:0001 DF4032 partition 3 4.00 MiB
[ 6.405269] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.405286] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.406127] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-3/input0
[ 6.406632] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:045E:0745.0002/input/input4
[ 6.416041] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffa61780d9d000, 00:c0:08:90:02:e9, XID 0c000800 IRQ 313
[ 6.416051] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.418377] mmcblk0: p1
[ 6.426550] random: crng init done
[ 6.453674] Intel(R) Wireless WiFi driver for Linux
[ 6.453677] Copyright(c) 2003- 2015 Intel Corporation
[ 6.454951] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-3168-26.ucode failed with error -2
[ 6.455044] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-3168-25.ucode failed with error -2
[ 6.455088] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-3168-24.ucode failed with error -2
[ 6.455133] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-3168-23.ucode failed with error -2
[ 6.463259] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-3/input1
[ 6.473099] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:045E:0745.0003/input/input5
[ 6.480769] iwlwifi 0000:03:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[ 6.535761] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-3/input2
[ 6.562645] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
[ 6.564802] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[ 6.564999] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[ 6.576314] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.577189] acpi device:2b: registered as cooling_device5
[ 6.577343] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 6.578630] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 6.674955] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.702903] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.705864] fbcon: inteldrmfb (fb0) is primary device
[ 6.733897] usb 1-4: USB disconnect, device number 3
[ 6.753883] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.753893] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.753895] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.753897] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.753898] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.753901] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 6.853422] Console: switching to colour frame buffer device 240x67
[ 6.873546] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.889572] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 6.890122] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.890769] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.891251] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.891572] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.035241] usb 1-4: new full-speed USB device number 5 using xhci_hcd
[ 7.180947] usb 1-4: New USB device found, idVendor=8087, idProduct=0ab6
[ 7.180951] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.180953] usb 1-4: Product: UDOO X86
[ 7.180956] usb 1-4: Manufacturer: UDOO
[ 7.180957] usb 1-4: SerialNumber: K71942236
[ 7.199131] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[ 7.199537] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[ 7.221710] cdc_acm 1-4:1.0: ttyACM0: USB ACM device
[ 7.222400] usbcore: registered new interface driver cdc_acm
[ 7.222402] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.598153] EXT4-fs (sda2): recovery complete
[ 8.669313] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.711266] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 9.073390] r8169 0000:02:00.0 eth0: link down
[ 9.073470] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.403969] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.403973] Bluetooth: BNEP filters: protocol multicast
[ 11.403981] Bluetooth: BNEP socket layer initialized
[ 13.726254] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[ 13.726436] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[ 13.769776] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[ 13.769956] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[ 13.785183] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.264621] wlan0: authenticate with 9c:97:26:8a:41:39
[ 17.271039] wlan0: send auth to 9c:97:26:8a:41:39 (try 1/3)
[ 17.272981] wlan0: authenticated
[ 17.274640] wlan0: associate with 9c:97:26:8a:41:39 (try 1/3)
[ 17.278588] wlan0: RX AssocResp from 9c:97:26:8a:41:39 (capab=0x411 status=0 aid=7)
[ 17.281238] wlan0: associated
[ 17.281312] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1050.018626] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1050.018636] Bluetooth: HIDP socket layer initialized
[ 1050.072868] input: PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/bluetooth/hci0/hci0:256/0005:054C:0268.0004/input/input12
[ 1050.073644] sony 0005:054C:0268.0004: input,hidraw3: BLUETOOTH HID v0.00 Joystick [PLAYSTATION(R)3 Controller] on 10:f0:05:92:26:37

NickDG

hope the above helped, let me know if you still require more information.

nadenislamarre

no. i was not able to determine the driver required for your emmc for the moment.
i don't really know how to determine it.

NickDG

nadenislamarre , i hope this helps , they say the kernel needs to be rebuilt i hope you can add this to your next release image 🙂

https://www.udoo.org/forum/threads/kernel-config-for-mmc.7243/

NickDG

🙁 ok , let me know if there is anything else i can try to help you get the right information