Playstation2 - first beta

nadenislamarre · 2018-09-10T20:43:19+00:00

Hi, Playstation 2 arrived on batocera.linux ! Please find what you can get with my 2Ghz i3 cpu and integrated radeon gpu. http://batocera-linux.xorhub.com...

joinski

I tested it with my Intel NUC (DC53427HYE with i5-3427u and Intel HD Graphics 4600) and a Skylake system with Intel Pentium G4500 (with integrated Intel HD Graphics 530) and both unfortunately didn't work.
I get this error message on both systems:

"The plugin reports that your hardware or software/drivers are not supported.

/usr/PCSX/bin/plugins/libGSdx.so

nadenislamarre

yes, this is the message you get when your hardware is not compatible.
wha'ts your opengl version displayed on this hardware ?

joinski

nadenislamarre

opengl is 4.2 on the NUC (i5-3427U with Intel HD Graphics 4600) and 4.5 on the Pentium G4500 (Intel HD Graphics 530).

I will now test some other systems.

joinski

Just tested with another Intel NUC (D54250WYK with i5-4250U and Intel HD Graphics 5000) and it is working! 🙂
It has OPENGL 4.5 and avx2 (the Systems before (i5-3427U and Pentium G4500), did not have avx2 under System Settings, Information).

Played a bit with GTA III and found out, that the D-Pad does not work in game (according to ingame Options, it should be possible to move with D-Pad and Analog-Stick, but only the Analog-Stick works for moving in game. I'm using original Sony PS3-Controller).

It also works on my Asus Zenbook UX305CA with m7-6Y75 CPU and Intel HD Graphics 515 (opengl 4.5 and also avx2).

nadenislamarre

thanks for your feedback.

2 points:
- i will try to write a mini program to determine what cause the computer to not work. this will be helpfull to determine the good cause, because opengl version is not the main issue apparently.
- for the pad in gta, i'll check. thanks.

DnevnoySwet

nadenislamarre PS2 no game started, the emulator does not work. Emulator installed on your PC these games Bionicle Heroes, Contra, and Silent Hill 3 plays. Tried on two PCs and on one was not started.
1 PC
AMD Phenom II X4 Black Edition 965, 3850 MHz
GeForce GTX 660 (2 ГБ) OpenGL 4.6.0
2 PC
Intel i5 2400 MHz
OpenGL 4.6.0 NVIDIA

dribox10

Good morning, very good to have ps2 in batocera, to get to play you play with pes2014, ben 10 anyway good, I have 2 questions.
1 to start bartocera come into play ps2 normal loads and game, more to leave this game and choose another in the same does not load any more, I need to restart the batocera and choose the game there yes it works.
2- My generic ps3 controls work directional in some games and another example does not work in pes 2014 and not in ben10 and gta.
right up left does not work. now if you add a simple wired control the directional function ok.

joinski

Tested some more systems:

Does not work:
Pentium G3220 with Intel HD Graphics -> opengl 4.5 (no avx2)
Pentium G3220 with Radeon HD7750 -> opengl 3.3 (no avx2)
Pentium G3220 with GeForce GTX750Ti -> opengl 4.3 (no avx2)

Works:
Core i3-4360 with Intel HD Graphics 4600 -> opengl 4.5 with avx2
Core i7-4790 with Intel HD Graphics 4600 -> opengl 4.5 with avx2

superMDMArio

joinski most likely the problem is the lack of avx2. my i5 760 does not have avx2 and also is not working on batocera but on windows it works super well.

tejaaaj

thank u for this great release hopefully get bitter over time
my computer 2nd generation core i7 ( avx only ) dual GPU Intel hd 3000 which is the default
and nvidea gt 525m

in windows i have option to choose from one of them ( rt click and run with high performance or default)
in Linux i once in Linux mint was able to choose nvidea for display
but here in batocera the default is Intel hd 3000 which is weak in pcxr2 (even in windows) is there way to be able to run ps2 emulation with 2nd gpu and this is will be huge to all pcs with dual gpus which is popular mostly in laptops
thank u in advance

nadenislamarre

@joinski @superMDMArio can you pastebin your files:
/recalbox/share/system/configs/PCSX2/logs/emuLog.txt

personnally, i get inside :
OpenGL information. GPU: Mesa DRI Intel(R) HD Graphics 520 (Skylake GT2) . Vendor: Intel Open Source Technology Center. Driver: (Core Profile) Mesa 18.1.4
INFO: GL_EXT_texture_filter_anisotropic is available
INFO: GL_ARB_gpu_shader5 is available
INFO: GL_ARB_viewport_array is available
INFO: GL_ARB_shader_image_load_store is available
INFO: GL_ARB_clear_texture is available
INFO: GL_ARB_direct_state_access is available
INFO: GL_ARB_texture_barrier is available
INFO: GL_ARB_get_texture_sub_image is available

Current Renderer: OpenGL (Hardware renderer)
No extenstion supported to get available memory. Use default value !
Available VRAM/RAM:3840MB for textures

in case of problem, you should get
ERROR: xxx is NOT SUPPORTED

superMDMArio

nadenislamarre https://pastebin.com/iJ077KvJ

joinski

nadenislamarre
https://pastebin.com/Xxxg1Csy

tejaaaj

superMDMArio
i noticed that pcsx2 1.5 latest builds open gl not working in my case in windows ? which was working well before ( builds of may 2018)
so i advice u to try it on windows and see opengl if working or not?
i never reported to the developer but i ll wait and see next few builds if act same

superMDMArio

tejaaaj I use version 1.4.0 on Windows and it works super well. I will test with this 1.5.0 to see if it gives any problem.

Alcapone

I have a Core i3 CPU and was testing the F12002. The game starts with a message saying that there is no control connected

update

I have tested other controls in several games and noticed some errors. Select down but go up. Up, but it goes down. I could not configure the control satisfactorily.

nadenislamarre

superMDMArio i had a super big bug when you had not avx2.
plugins of avx2 where loaded with version without avx2, i cannot work.
i will propose a beta 2.

nadenislamarre

@Alcapone
@dribox10
@joinski

i've not pad issue including in gta3 with the d-pad.
But each time i add an emulator i've this kind of problem, because pad are not that easy.
Can you help me to fix your pads.

Please send me your 2 files:
- /recalbox/share/system/.emulationstation/es_input.cfg
- /recalbox/share/system/configs/PCSX2/inis/OnePAD.ini

so that i can analyse wha'ts wrong.
thanks.

joinski

nadenislamarre

here the 2 files:
https://www.file-upload.net/download-13316460/cfgini.zip.html

nadenislamarre

please continue on the beta2 post :
https://batocera-linux.xorhub.com/forum/d/1464-playstation2-beta2

« Previous Page Next Page »