various Problems in Batocera (actual Stable, PC 64 Bit)

PhantomLord80

Hello, I have installed the batocera.linux on a SSD in a PC (Core i5 Series 3, 2 GB RAM, 250 GB SSD, Intel Graphics HD on Board)
So far so good.
I have installed also a Bluetooth USB-Adapter, the WiiU Pro Controller are running, but Batocera forgets the Pairing after every Boot. Why that?
I have also the Dolphin Bar (Sensorbar for Wii with Bluetooth for WiiMotes). If i set the mode for the Passthrough (the mode that mades the Wii Emulator work with the bar), Batocera gets killed, the screen is black with "batocera linux".
Also after a time the system does not boot properly. a black Baotocera grafics screen appears and stays there for hours. When I take out the BLuetooth dongle (what worked before), the Reboot works (white Batocera screen and then the Emulation Station)

And which graphic adapters do work or are recommeded?

I think the Support of HIDs and Bluetooth is not really ready yet?
Has anybody Tips or Help? Thank you.

nadenislamarre

the bluetooth support is ready. but you may encounter while some causes problem on linux.
normally, files for bluetooth goes in /var/lib/bluetooth. this is saved saved when you shutdown batocera and restore at reboot.
once you pair your device, check thisi directly, you should find your wiiu pad.
restore and check if files are here.

PhantomLord80

Thanks for your reply. First I made an Update. It seems to work better now.

Can you tell me:

1) what does the black-blue Batocera bootscreen mean? I have to plug out every controller then
the next boot shows the white Batocera Bootscreen an then seconds later the EMulation Station.

2) Does a PCIe-Graphiccard bring better Performance for Wii/PS2/Saturn/Dreamcast. I can use a 1-Slot Solution
like GeForce GTX 750 | 2GB GDDR5 or Radeon R5 230 2GB DDR3

Does it bring a better performance and are these Cards supported?

nadenislamarre

on x86, when batocera boots,
first grub is loaded, and it display batocera.linux as text.
then linux is loaded, and the boot sequence starts.
one of the first things done is to display this black-blue screen.
then, other services are loaded, bluetooth, wifi, etc...
and finally, at the end (or almost) emulationstation starts replacing the black-blue by the white batocera screen (this screen is in es).
thus, during the sequence, it looks like that something is blocking for you.
but i don't understand if you have to unplug before batocera starts, or when exaclty.
for cards, just test, i cannot tell.

PhantomLord80

Okay, i try to explain so good I can:
Most cold boots: 1) BIOS -> 2) Black Screen with Batocera.linux in left top corner -> 3) Black-blue batocera graphics ->System stays there, 15 Minutes, 1 hour, 2 Hours

Then I plug out every HID, Controller, Powerswitch off, Powerswitch on
then: 1) BIOS -> 2) Black Screen with Batocera.linux in left top corner -> 3) white Batocera graphics -> 4) some Seconds later Emulation Station, System is ready to use.

nadenislamarre

any pad ?
is it a bluetooth pad producing a problem ?
you can get more information by editing on the key the 2 files : grub.conf
replace console=tty3 quiet loglevel=0
by nothing
and reboot

souvelhomasjogo

Good afternoon. Since the version 5.16 of batocero the emulators screens that use the libretro are frozen being necessary to disconnect the PC. I use the 64-bit version.

FortalezaCampeaoDaSerieB

souvelhomasjogo Mude o drive de video de 'gl' para 'sdl2'

souvelhomasjogo

FortalezaCampeaoDaSerieB blz maninho? valeu pela resposta ... como faço esse processo?

FortalezaCampeaoDaSerieB

souvelhomasjogo melhor so va em "\BATOCERA\share\system\configs\retroarch" abra o arquivo "retroarchcustom.cfg" e mude video_threaded = "true" para "false".

souvelhomasjogo

FortalezaCampeaoDaSerieB Funcionou maninho. Muito Obrigado!

davidmarin

tengo la version 5.18 ¿Donde se editan las opciones por defecto de Reicast? yo no quiero deshabilitar el 16:9 hack.