No video on Intel Celeron 540 and batocera 5.20

acir · 2019-01-23T22:46:19+00:00

Hi guys, I have two Compaq Presario C750BR. One of them is using Batocera 5.19 and working properly. I can't update it, but that will be another thread. Th...

poke

acir could you please try this build and see if you get at least to ES?

https://batocera-linux.xorhub.com/users/poke-1,0/4.20.5/

Games will not run due to a bug I introduced, but if ES runs, we know the problem was solved.

rptx

poke
I have the same issue.
I tried the 5.21 build and i can reach ES, (configure controller screen, then game selection menu).

g12345567

poke

poke https://batocera-linux.xorhub.com/users/poke-1,0/4.20.5/

Games will not run due to a bug I introduced, but if ES runs, we know the problem was solved.

Thanks. This also fixes the blank screen and hanging at startup for my setup. Using older Intel HD on board graphics.

As you said. Games and Kodi not loading with this development release. So for now we roll back to 5.19. Till the full release of 5.21.

poke

rptx which 5.21 build? The one I provided?

rptx

poke
Yes, https://batocera-linux.xorhub.com/users/poke-1,0/4.20.5/batocera-5.21-x86_64-20190131.img.gz

poke

rptx ok. I will build a new image next week. You should be able to run games then...

poke

rptx sorry, i built your image but delete it by mistake. do you still want to test it? if so, i will build it again.

rptx

@poke
There's no emergency, i can test just before the release of batocera 5.21. 😉

poke

Please test the following build. It's based on the newest LTS kernel. Games should work. Report back your results.

https://batocera-linux.xorhub.com/users/poke-1,0/5.20/4.19.21/

acir

poke It indeed worked. I've even been able to play a PS1 game. But the system notified me about a update from feb-18 and this update broke the system again.

Your version had the issue fixed.

I'm getting this message now:

intel: waited 2020 ms for i915.ko driver to load vesa: Ignoring device with a bound kernel driver
(EE) Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The X.Org Foundation support at http://wiki.x.org for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error

acir

And this is the log file:

cat /var/log/Xorg.0.log

[ 88.830]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 88.831] Build Operating System: Linux 4.4.0-141-generic x86_64
[ 88.831] Current Operating System: Linux BATOCERA 4.18.20 #1 SMP Fri Jan 18 02:18:58 UTC 2019 x86_64
[ 88.831] Kernel command line: BOOT_IMAGE=/boot/linux label=BATOCERA console=tty3 quiet loglevel=0 vt.global_cursor_default=0
[ 88.831] Build Date: 18 January 2019 05:15:19AM
[ 88.831]
[ 88.832] Current version of pixman: 0.34.0
[ 88.832] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 88.832] Markers: (--) probed, ( ) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 88.834] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 20 19:09:31 2019
[ 88.834] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 88.834] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 88.834] (==) No Layout section. Using the first Screen section.
[ 88.834] (==) No screen section available. Using defaults.
[ 88.835] ( ) |-->Screen "Default Screen Section" (0)
[ 88.835] ( ) | |-->Monitor "<default monitor>"
[ 88.835] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 88.835] (==) Automatically adding devices
[ 88.835] (==) Automatically enabling devices
[ 88.835] (==) Automatically adding GPU devices
[ 88.835] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 88.835] (WW) The directory "/usr/share/fonts/X11//TTF/" does not exist.
[ 88.835] Entry deleted from font path.
[ 88.835] (WW) The directory "/usr/share/fonts/X11//OTF/" does not exist.
[ 88.835] Entry deleted from font path.
[ 88.835] (WW) The directory "/usr/share/fonts/X11//Type1/" does not exist.
[ 88.835] Entry deleted from font path.
[ 88.835] (WW) fonts.dir' not found (or not valid) in "/usr/share/fonts/X11//100dpi/". [ 88.835] Entry deleted from font path. [ 88.835] (Run 'mkfontdir' on "/usr/share/fonts/X11//100dpi/"). [ 88.835] (WW)fonts.dir' not found (or not valid) in "/usr/share/fonts/X11//75dpi/".
[ 88.835] Entry deleted from font path.
[ 88.835] (Run 'mkfontdir' on "/usr/share/fonts/X11//75dpi/").
[ 88.835] (==) FontPath set to:
/usr/share/fonts/X11//misc/
[ 88.835] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 88.835] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 88.835] (II) Loader magic: 0x80cc20
[ 88.835] (II) Module ABI versions:
[ 88.835] X.Org ANSI C Emulation: 0.4
[ 88.835] X.Org Video Driver: 24.0
[ 88.835] X.Org XInput driver : 24.1
[ 88.835] X.Org Server Extension : 10.0
[ 88.838] (--) PCI:*(0@0:2:0) 8086:2a02:103c:30d9 rev 3, Mem @ 0x51000000/1048576, 0x40000000/268435456, I/O @ 0x000030b0/8, BIOS @ 0x????????/131072
[ 88.838] (--) PCI: (0@0:2:1) 8086:2a03:103c:30d9 rev 3, Mem @ 0x51100000/1048576
[ 88.838] (II) Open ACPI successful (/var/run/acpid.socket)
[ 88.838] (II) LoadModule: "glx"
[ 88.839] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 88.841] (II) Module glx: vendor="X.Org Foundation"
[ 88.841] compiled for 1.20.3, module version = 1.0.0
[ 88.841] ABI class: X.Org Server Extension, version 10.0
[ 88.841] (==) Matched intel as autoconfigured driver 0
[ 88.841] (==) Matched modesetting as autoconfigured driver 1
[ 88.841] (==) Matched fbdev as autoconfigured driver 2
[ 88.841] (==) Matched vesa as autoconfigured driver 3
[ 88.841] (==) Assigned the driver to the xf86ConfigLayout
[ 88.841] (II) LoadModule: "intel"
[ 88.841] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 88.842] (II) Module intel: vendor="X.Org Foundation"
[ 88.842] compiled for 1.20.3, module version = 2.99.917
[ 88.842] Module class: X.Org Video Driver
[ 88.842] ABI class: X.Org Video Driver, version 24.0
[ 88.842] (II) LoadModule: "modesetting"
[ 88.842] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 88.842] (II) Module modesetting: vendor="X.Org Foundation"
[ 88.842] compiled for 1.20.3, module version = 1.20.3
[ 88.842] Module class: X.Org Video Driver
[ 88.842] ABI class: X.Org Video Driver, version 24.0
[ 88.842] (II) LoadModule: "fbdev"
[ 88.842] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 88.842] (II) Module fbdev: vendor="X.Org Foundation"
[ 88.842] compiled for 1.20.3, module version = 0.4.4
[ 88.842] Module class: X.Org Video Driver
[ 88.842] ABI class: X.Org Video Driver, version 24.0
[ 88.842] (II) LoadModule: "vesa"
[ 88.843] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 88.843] (II) Module vesa: vendor="X.Org Foundation"
[ 88.843] compiled for 1.20.3, module version = 2.4.0
[ 88.843] Module class: X.Org Video Driver
[ 88.843] ABI class: X.Org Video Driver, version 24.0
[ 88.843] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 88.843] (II) intel: Driver for Intel(R) HD Graphics
[ 88.843] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 88.843] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 88.843] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 88.843] (II) FBDEV: driver for framebuffer: fbdev
[ 88.843] (II) VESA: driver for VESA chipsets: vesa
[ 88.843] (--) using VT number 5

[ 90.855] intel: waited 2020 ms for i915.ko driver to load
[ 90.858] (EE) open /dev/dri/card0: No such file or directory
[ 90.858] (WW) Falling back to old probe method for modesetting
[ 90.858] (EE) open /dev/dri/card0: No such file or directory
[ 90.858] (II) Loading sub module "fbdevhw"
[ 90.858] (II) LoadModule: "fbdevhw"
[ 90.858] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 90.858] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 90.858] compiled for 1.20.3, module version = 0.0.2
[ 90.858] ABI class: X.Org Video Driver, version 24.0
[ 90.858] (EE) open /dev/fb0: No such file or directory
[ 90.858] (WW) Falling back to old probe method for fbdev
[ 90.858] (II) Loading sub module "fbdevhw"
[ 90.859] (II) LoadModule: "fbdevhw"
[ 90.859] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 90.859] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 90.859] compiled for 1.20.3, module version = 0.0.2
[ 90.859] ABI class: X.Org Video Driver, version 24.0
[ 90.859] (EE) open /dev/fb0: No such file or directory
[ 90.859] vesa: Ignoring device with a bound kernel driver
[ 90.859] (EE) Screen 0 deleted because of no matching config section.
[ 90.859] (II) UnloadModule: "modesetting"
[ 90.859] (EE) Screen 0 deleted because of no matching config section.
[ 90.859] (II) UnloadModule: "fbdev"
[ 90.859] (II) UnloadSubModule: "fbdevhw"
[ 90.859] (EE) Screen 0 deleted because of no matching config section.
[ 90.859] (II) UnloadModule: "vesa"
[ 90.859] (EE) Device(s) detected, but none match those in the config file.
[ 90.859] (EE)
Fatal server error:
[ 90.860] (EE) no screens found(EE)
[ 90.860] (EE)
Please consult the The X.Org Foundation support at http://wiki.x.org for help.
[ 90.861] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 90.861] (EE)
[ 90.862] (EE) Server terminated with error (1). Closing log file.

poke

acir please, do not use the automatic update feature. It will put you back to vanilla batocera and the problematic kernel. You have to stick to my version until we release a correction. It will come in 5.21 or 5.22.

Patrick76

Will FS-UAE run again (DF:0 always empty/no.adf loading with correct kickstart!)? 5.20 on USB-Drive in x86/64.🤓

« Previous Page