batocera.linux 5.25 with nvidia-legacy drivers (390.xx) - Discontinued

poke · 2019-01-25T12:37:26+00:00

Community provided build for 5.27 with nvidia-legacy: https://batocera.org/users/alexxandrefs/5.27-nvidia-legacy/ I’m looking for someone to maintain this c...

mpb

poke

[poke wrote:] I won't provide builds for 340.xx. Sorry, I don't have the necessary hardware.

Do any of the old versions of batocera include the 340.xx driver? I have a 2010 Mac Mini with GeForce 320M graphics, and I am curious to see if the 340.xx driver works. Thank you.

inigo123

mpb I also have an old system requiring nvidia 340.xx. Just letting you know there's one more of us out there!

poke

mpb nvidia-driver was enable in 5.19 with version 4xx.xx. So, no versions with 340.xx.

Sduva

poke same problem here, Dual GPU. Can’t switch 🙁 Thank you so much for your help.

poke

Sduva notebook with dual-gpus is a problem. i may post a test build next week.

Gman102

Yeah I'm pretty sure it keeps running everything from the CPU, and when I activate Nvidia drivers it makes it worse. Don't know what the issue is but until I find a solution I can only run things up to snes roughly

poke

Gman102 could you please provide a support archive? boot batocera with nvidia enabled and generate one via the options menu.

poke

Gman102 are you using this build or vanilla? nvidia is present in vanilla. just enabled it in the same way. you dont need to use this build. you cards are supported there.

Sduva

poke wow. Thank you so much!

VaGNaroK

You are the best, without your contributions we would never have Nvidia driver in the batocera. Tanks Man.

poke

could someone post the output of lspci on a dual-gpu (intel and gpu) setup?

Also, dual-gpu users, please test the following image and report back
https://batocera-linux.xorhub.com/users/poke-1,0/5.20/4.19.21/
I would like to know:
with nvidia-driver=false: if you can get to ES and OpenGL string in settings
with nvidia-driver=true: if you can get to ES and OpenGL string in settings

That image is based on 5.20, the nvidia-legacy driver is not enabled.

albiihza

poke sir i want to ask
i have geforce gt 520 card but why i just get blank screen on batocera with legacy driver ? can you tell me what should i do ?

Sduva

poke ok I will try it tomorrow!!
I don’t know if it useful but lspci outputs this:
03:00.0 "Class 0280" "168c" "0032" "1a3b" "2c97" "ath9k"
00:1f.2 "Class 0106" "8086" "1e03" "1043" "1477" "ahci"
00:1c.0 "Class 0604" "8086" "1e10" "1043" "1477" "pcieport"
00:1f.0 "Class 0601" "8086" "1e59" "1043" "1477" "lpc_ich"
00:01.0 "Class 0604" "8086" "0151" "1043" "1477" "pcieport"
00:16.0 "Class 0780" "8086" "1e3a" "1043" "1477" "mei_me"
01:00.0 "Class 0302" "10de" "0fdf" "1043" "1477" "nouveau"
00:1b.0 "Class 0403" "8086" "1e20" "1043" "1477" "snd_hda_intel"
00:1c.3 "Class 0604" "8086" "1e16" "1043" "1477" "pcieport"
00:1f.3 "Class 0c05" "8086" "1e22" "1043" "1477"
00:00.0 "Class 0600" "8086" "0154" "1043" "1477" "ivb_uncore"
00:1c.1 "Class 0604" "8086" "1e12" "1043" "1477" "pcieport"
00:1a.0 "Class 0c03" "8086" "1e2d" "1043" "1477" "ehci-pci"
00:1d.0 "Class 0c03" "8086" "1e26" "1043" "1477" "ehci-pci"
04:00.0 "Class 0200" "1969" "1091" "1043" "1477" "alx"
00:02.0 "Class 0300" "8086" "0166" "1043" "1477" "i915"
00:14.0 "Class 0c03" "8086" "1e31" "1043" "1477" "xhci_hcd"

poke

albiihza I need more information to debug problems. is it a notebook with a dual-gpu setup?

carlosroberto2094

Is there an image with the legacy drivers? I was able to run the 1.20 version, but I'm having some problems with GameCube emulation.
I have a 430M and would like to try the legagy driver, but I don't have any knowledge in linux and programming.

poke

carlosroberto2094 see first post.

poke

Sduva thx! try the 4.19.21 build.

https://batocera-linux.xorhub.com/users/poke-1,0/5.20/4.19.21/
I would like to know:
with nvidia-driver=false: if you can get to ES and OpenGL string in settings
with nvidia-driver=true: if you can get to ES and OpenGL string in settings

That image is based on 5.20, the nvidia-legacy driver is not enabled.

Sduva

poke I tried the 4.19.21 build, it made me configure manually the xbox 360 controller.
With nvidia-driver=false (with the # in the conf file) I could get to ES and in settings/information I could read OpenGL string, in my case 4.2 version
With nvidia-driver=true (deleting the # in the conf file) same results as above.
Is this what you needed? Please let me know.
Thanks

joinski

poke I won't provide builds for 340.xx. Sorry, I don't have the necessary hardware.

Do you want to have the necessary hardware? I have a system with nvidia ION-Chipset laying around, which i do not need anymore.
It is a Zotac ION ITX P (IONITX-PE) with an Intel Celeron SU2300 and NVIDIA GeForce 9400 GPU.
I could donate it and send it to you (you just would have to pay shipping costs).

poke

joinski thanks for the offer, but shipping costs to Brazil are high.

joinski

poke
I have just looked it up and it would cost 16€.
But it would be without insurance (so if the packet gets lost, it's lost).
With insurance it would cost 46€ (which is a bit high).
What do you think?

poke

joinski let's wait a bit. I still have to think about a way to incorporate 390.xx in vanilla.

« Previous Page Next Page »