Problems with USB interface XinMotek 2 players

lbmex

Hi guys, I have a problem with USB Interface XinMotek 2 playes 18 Pins...I build my bartop with an old PC x64 but I can't configure to reconized to players 🙁 I read at this forum a solution for this problem...put a line in cmdline.txt ....something like usbhid quirks=0x16c0:0x05e1:0x040, but I can't found this file on my system(cmdline.txt)... I'm using batocera 5.22 version. Maybe this file change other name or there are other way to solve this problem. Someone can help please.... thanks in advanced.

Hola chicos, tengo un problema con la interfaz USB XinMotek 2 playes 18 Pines ... Construí mi bartop con una PC vieja x64 pero no puedo configurarlo para que reconozca los 2 jugadores 🙁 Leí en este foro una solución para este problema. ..escribir una línea en cmdline.txt .... algo así como usbhid quirks = 0x16c0: 0x05e1: 0x040, pero no puedo encontrar este archivo en mi sistema (cmdline.txt) ... Estoy usando la versión batocera 5.22. Quizás cambio el archivo por otro nombre o hay otra manera de resolver este problema. Alguien puede ayudarme por favor ... gracias de antemano.

Halvhjearne

i have the same controller and you dont need to change anything, it should work out the box, but it is likely that it is not configured correct for you, depending on what keys you use and if the controller is in analog or digital mode.

if it dosnt work, then it is most likely just cause you need to configure the joysticks in emulationstation and it will work.

lbmex

Halvhjearne Ok I'll try to configure the joysticks in emulationstation. I have tried to configure in retroarch specifically in Neogeo core...change settings controllers...I assign each one button for both controllers...save the configuration core...when and I try to play again, the button configuration is the same for player 2....if I move the joystick up on player1 also player2 move up.......I check the retroarch.conf and settings there are correct.

Halvhjearne

make sure it is set to pov mode and not analog mode for movement aswell or that might be a problem at a later time.

lbmex

I can SOLVED!! is my bad, I don't wired correctly my buttons 😛 If anyone have the same problem, check this diagram to wire usb interface with buttons. https://github.com/recalbox/recalbox-os/wiki/Xin-mo-(EN)

Halvhjearne

no wonder you had trouble, that pinout is for an older version of the xin-mo encoder.