batocera.linux 5.26 rc1

nadenislamarre · 2020-05-10T18:33:00+00:00

The 5.26 rc1 is coming. Please post only on this thread about regressions compared to 5.25, or tests done to confirm things working to share. You can update...

neko

There is a small problem on the X68000 disk drives boot order. If you have loaded any floppy image before, you quit the game, and then you are trying to play any HDD games it will not be loaded, because the floppy disk was not properly ejected as Retroarch remembered what you have loaded previously by default. This could be fixed by turning OFF the “Save Disk Paths” in the core option.

Also as reported earlier the PC-9801 emulator np2kai is broken on the Odroid Go Advance since mid-February.
Here is the bottom part of the log file, hope to see a fix soon :-) Thank you.

[INFO] RetroArch 1.8.6 (Git fe115d9d1d)
[INFO] Redirecting save file to “/userdata/saves/pc98/Rusty.srm”.
[INFO] Redirecting save state to “/userdata/saves/pc98/Rusty.state”.
[INFO] === Build =======================================
[INFO] Capabilities: NEON VFPv3 VFPv4
[INFO] Built: May 12 2020
[INFO] Version: 1.8.6
[INFO] Git: fe115d9d1d
[INFO] =================================================
[ERROR] Couldn’t find any video driver named ""
[INFO] Available video drivers are:
[INFO] gl
[INFO] oga
[INFO] sdl2
[INFO] null
[WARN] Going to default to first video driver…
[INFO] Loading dynamic libretro core from: “/usr/lib/libretro/np2kai_libretro.so”
[ERROR] Failed to open libretro core: “/usr/lib/libretro/np2kai_libretro.so”
Error(s): /usr/lib/libretro/np2kai_libretro.so: undefined symbol: retro_vfs_stat_impl
[INFO] Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
[INFO] Unloading game..
[INFO] Unloading core..
[INFO] Unloading core symbols..
2020-05-15 18:08:59 INFO (emulatorlauncher.py:221):<module>: Exiting configgen with status 1

rodrigodisselle

Any news about the Batocera 5.26 image for Tinkerboard?
@nadenislamarre can you help me?
The Tinkerboard batocera-5.26-tinkerboard-20200420.img does not start.
It crashes on the Batocera screen.
I tested it on 2 different cards.

nadenislamarre

@rodrigodisselle i’ve pushed a version for tinkerboard in beta this morning.
i’ve not tested it (i’ve not a such board). but demetris applied some fixes on it.
i’ve put a new x86_64 beta too, not yet a rc2 because i’ve several fixes to do.

Cemi70

nadenislamarre Thank you. The Tinkerboard boot problem is gone with this new beta Image. Unfortunately the Bluetooth controller pairing problem is still there. The bluetooth seems deactivated. Wifi works.

stikoyan

Hello, i have an odd issue. i have x86_64 using version 5.26 2020/05/18. when i start Batocera, the xbox 360 wired controller doesnt work. i have to unplug then plug back in each time i boot.

stikoyan

stikoyan any help with this issue?

biGdada

i’m getting a black screen (or an empty bezel ) while using parallel n64 and flycast cores. did not happen in 5.25.
running on a pc (x64).
tried to use reicast but for whatever reason it runs too fast and without sound

jdorigao

biGdada In the case of quick reicast just delete the reicast folder that is in the config folder

biGdada

jdorigao 10x.
also, to fix parallel and flycast i had to delete retroarchcustom.cfg

michel83

hello, i have only tested on x86-64, with 5.26 18/05/20 version
It is missing ‘ps2’ configuration on ‘game setting’/‘per system advanced configuration’.
Is it possible to enable by default the 4/3 on ps2 for next versions.
c64 (vice or libretro) dont work with 7z.
also on fbneo i have some games who doesn’t work since a few times (demon front, bonze adventure,superman..)
Am i alone to have this problem ?
flycast dont work with driving games, impossible to turn. Is someone know how to configure it ?
i tested a few openbor games without problems

thanks.

Crazy_Bessie

Testing 5.26 beta (Odroid N2) - 10th May 2020 version
@nadenislamarre

Have issues with batocera not seeing my USB SATA SSD Hard drive anymore so only sees the freeware roms on the EMMC (16gb)

If I restart the Odroid n2 a few times it does detect it but mostly doesn’t.
I have Storage Device set to ANYEXTERNAL .. mostly my SSD isn’t listed as an option.

Worked fine on the March stable release and below. I switched back to the March stable version, so I know it’s not a fault with my hard drive.

Lewi

Same Problems with PS2 ×86-64 Bit Beta 1805 here. At 3DS, I can see the Corners of Citra, it’s not Fullscreen. My 360 Pad with Dongle does not work at Citra. Just at this Emulator. But am I right that the Version from 18.05 is just a Beta not a RC1?

atwk

Will libretro/mupen64plus-next also come into the rpi2/3 images? I just switched to batocera, and now the controllers don’t work in some games (e.g. Kirby 64).

Sanick88

Bonjours, pas de sons avec les vidéos snaps, je suit en x86_64 version 5.26 2020/05/18 !
Comment corriger le problème?
Merci

VaGNaroK

testing the version batocera-5.26-x86_64-20200518 I found (possible bug) in the sound area, where the “system volume” slider is useless, even if the user moves it to such percentage, after leaving and returning to the sound area it does not stay in the percentage that was set back to 0.

Vídeo:

BZZ

VaGNaroK This is very old bug. I think we all had it at some point ;-)

hellboy2

VaGNaroK I have this same problem, as mentioned above!
This is impacting the screen saver, when I put it to view videos, they don’t come out with sound!

BZZ Is it possible to fix it manually, at 85%?

BZZ

hellboy2 dont ask me mate I have very little knowledge about this ‘challenge’. There are many topics on this in the forum or you can go to discord ;-)

nadenislamarre

@VaGNaroK it is partially a bug. in fact, this bar should be hidden in case the sound card has no hardware controller while this is what it is linked. so, this problem occuprs only on some pc.

the es video+background music will continue finally in 5.26. it is one or the other. it was fixed. but the fixed caused some issues. we will do differently in 5.27.

@michel83 in 5.26, useless configuration menu are no hidden. so, if an option is no visible, it means that it is not available for the configuration emualtor.
for the rest, we’re more interested here in problem that didn’t occured in 5.25 and that occurs now in 5.26 (regressions)

hellboy2

nadenislamarre here you say to the @VaGNaroK it happens on some computers!
But what I am using is an “rpi3” and it is giving this problem.
It is worth mentioning that version 5.25 of the batocera does not present this problem with the same “rpi3” card.

I applied an alternative via the SSH command, with the help of “poke-1.0”.

nadenislamarre

if i miss none, for the moment, (if i removed the one fixed), i’ve still this for 5.26

https://forum.batocera.org/d/3790-batoceralinux-526-rc1/6 flycast l/r
https://forum.batocera.org/d/3790-batoceralinux-526-rc1/10 odroidgoa : Loading dynamic libretro core from: “/usr/lib/libretro/snes9x_next_libretro.so” => reproduced. don’t know why. is snes_next required ?
https://forum.batocera.org/d/3790-batoceralinux-526-rc1/20 : pcsx doesn’t start
rockpro64 es => poke
format internal : message of reboot => fc

BZZ

hellboy2 ? rpi3 is a type of computer.

« Previous Page Next Page »