Chewi Larkbox Boot USB 3.x (usb stick) works but few issues to report

virtual-man007

I download x64 image and works to boot via usb stick and SD card!!!!!!!!!!!!!! - this is what i have to report so far looking promising …
Hardware: Chewi Larkbox
Booting normal USB 3.x (usb 8gb stick), using standard HDMI TV with sound built into tv.
Main problems at this time:

Does not seem to detect the sound at least through normal HDMI, in game nor in ES menu …
fixed: I had to switch system settings to HDMI0
Wifi, seems to work see’s SSD set password and all but never get’s IP?
I suspect this is a network driver issue at this time, i hope we can have support.

Note: I use this same Chewi Larkbox with built in windows and no issues with network. Let me know if I can be of help…

Good job so far guys… I can test more with Chewi Larkbox let me know.
VMAN

virtual-man007

virtual-man007 As for Issue 1 - sound does work via 3.5 jack only it seems… i tried messing with options to push audio to hdmi1 no go…

joinski

virtual-man007

did you try the “kodi-workaround” described here under Audio Issues?:
https://wiki.batocera.org/troubleshooting/

virtual-man007

joinski Much appreciated, will give this a test this evening! Loving the experience so far on Chewi Larkbox but we will only get better :) overtime.

virtual-man007

joinski I got this going straight from gui! HDMI0 is what i needed to point too! Did this from kodi as well in batocera system settings change audio to HDMI0. Appreciate the tip!

virtual-man007

@joinski Any guess for issue #2 - might be driver issue? odd never get’s ip (sees wifi ssid doe) … might be driver limitation who knows…

joinski

virtual-man007
issue #2 might be a driver issue, but i don’t know.
maybe you can come to the discord channel and ask there for help on this?