Message at boot in a black screen "batocera.linux"

RDX_777

I have installed an x64 and x86 version on my PC on a 16gb SD card, version of batocera 5.3, and at boot appears this message "batocera.linux", and nothing else happens. The PC remains on this screen only. Has anyone had this problem? Do you know what that means?(Sorry about my english.)

nadenislamarre

i guess that i've not enabled the driver of you sd card in the batocera boot.
1) can you confirm it works with a usb key ?
2) can you edit grub.conf (present 2 times, in boot/grub and efi) and remove "console=tty3 quiet loglevel=0"
and reboot to confirm the you loop on "Waiting for the root device"

RDX_777

nadenislamarre
hi
i used a usb key and a micro sd card (same as i used on raspberry pi 3).
the file grub.conf was edited, but the same thing happens, only a message "batocera.linux" stay on the screen.

nadenislamarre

if it works.
1) boot on the usbkey.
2) press f4 then ctrl+alt+f2, connect with root
3) lsmod > /recalbox/share/lsmod_before.txt
4) plug a sd card
5) lsmod > /recalbox/share/lsmod_after.txt
6) shutdown -h now
and send me the 2 files so that i can see which drivers i miss.

RDX_777

nadenislamarre
when i start a pc this screen appears, and i can't enter any command.

https://uploaddeimagens.com.br/imagens/16831873_1117680755008977_7053614797068227634_n-jpg

nadenislamarre

note that there are 2 grub file.
once edited, you'll get more lines displayed.

RDX_777

nadenislamarre note that there are 2 grub file.
once edited, you'll get more lines displayed.

Hi!!

I changed these files, and now another message has appeared! : D
I used notepad and gedit.

grub file
https://uploaddeimagens.com.br/imagens/grub1-png--2
https://uploaddeimagens.com.br/imagens/grub2-png--2

image of screen
https://uploaddeimagens.com.br/imagens/20170223_205917-jpg

maykel535

Put loglevel=0 to loglevel=10 and probe for see logs.