batocera 36 - beta1

nadenislamarre · 2023-01-07T08:30:00+00:00

Hi, build are done. Please give feedback. Please don’t ask new features here. Just regression. images are available here. you can update from batocera itse...

michel83

Hello, this is my test about xu4 beta 05/02/23. Performance is near to the old good 5.26.

libretro-flycast and saturn do not work. Thanks

fonzi

michel83

I just tested v36-dev-464802256a Feb 5 release.

Beetle works for Saturn but yeah,yabasanshiro still slow,

I tested Libretro Flycast and Flycast on Dreamcast game and ran fine for me.

michel83

@fonzi i just tested the XU4 version.

There is no beetle core for saturn and yes flycast works but flycast libretro dont works.

Log after launched libretro flycast core:

[ERROR] [GL]: GL: Invalid enum.

[ERROR] [Video]: Cannot open video driver … Exiting …

[ERROR] Erreur fatale reçue dans: “video_driver_init_internal()”

log after launched libretro yabasanshiro core:

[ERROR] [EGL]: No EGL configs with appropriate attributes.

[ERROR] [EGL]: #0×3000, EGL_SUCCESS

….

[ERROR] [EGL]: #0×3005, EGL_BAD_CONFIG

[ERROR] [Video]: Cannot open video driver … Exiting …

[ERROR] Erreur fatale reçue dans: “video_driver_init_internal()”

thanks

fonzi

I was using X86.

slayer

Hello guys,

I just updated from v35 to v36-dev-861904d9eb (05/02/2023) on the Raspberry Pi 4.

After rebooting, the system now stops booting with a kernel panic.

Kernel panic - not syncing: Could not decompress initial ramdisk image.

lau04

Same for me

I did an fresh Instal and now it’s impossible to lunch a game

Atari

The issue has been discovered to be that there was a change to the compression algorthm, but the /boot/boot/initrd wasn’t replaced properly to the new version. If you know what you are doing, you can simply delete the old initrd and leave the initrd.lz4 file there, or alternatively wait for a newer beta update which properly updates the file itself automatically. I would suggest the latter.

lau04

Atari merci I’ll wait 😉

lau04

Model 3 games don’t lunch anymore on pi4

tovarichtch

lau04 Always share the logs please. Devs can’t guess what’s causing the issues.

lau04

tovarichtch sorry about that how to joint the log here ?🤷‍♂️

tovarichtch

lau04 Copy and paste their content and use “Inline code” to unite them in a text block.

Patrick75

@nadenislamarre
Hi,
On V36-Dev- dated 2023/02/12 22:27, board PC 86-64, system Wii-U with valid BIOS.
I’ve experienced the following error message , might be linked to path. Roms located on same Hard Drive. No network mouthed.

This rom is a valid one, checked with clrmamepro, from redump.

Unable to lauch game
Path:
/userdata/roms/wiiu/xxxx (USA) (En,Fr,Es) (v1.05).wux

stderr states

killall: evmapy: no process killed

2023-02-13 22:09:30,734 ERROR (emulatorlauncher:530):runCommand

stdout states

2023-02-13 22:09:05,121 DEBUG (emulatorlauncher:123):start_rom Running system: wiiu

2023-02-13 22:09:05,139 DEBUG (unixSettings.py:21):initCreating parser for /userdata/system/batocera.conf

2023-02-13 22:09:05,141 DEBUG (unixSettings.py:69):loadAll Looking for global.* in /userdata/system/batocera.conf

2023-02-13 22:09:05,142 DEBUG (unixSettings.py:69):loadAll Looking for controllers.* in /userdata/system/batocera.conf

2023-02-13 22:09:05,142 DEBUG (unixSettings.py:69):loadAll Looking for wiiu.* in /userdata/system/batocera.conf

2023-02-13 22:09:05,143 DEBUG (unixSettings.py:69):loadAll Looking for wiiu.folder["/userdata/roms/wiiu"].* in /userdata/system/batocera.conf

2023-02-13 22:09:05,143 DEBUG (unixSettings.py:69):loadAll Looking for wiiu["Donkey Kong Country - Tropical Freeze (USA) (En,Fr,Es) (v1.01).wux"].* in /userdata/system/batocera.conf

2023-02-13 22:09:05,144 DEBUG (unixSettings.py:69):loadAll Looking for display.* in /userdata/system/batocera.conf

2023-02-13 22:09:05,145 DEBUG (Emulator.py:44):inituimode: Full

2023-02-13 22:09:05,152 DEBUG (unixSettings.py:69):loadAll Looking for wiiu-renderer.* in /userdata/system/batocera.conf

2023-02-13 22:09:05,153 DEBUG (unixSettings.py:69):loadAll Looking for wiiu["Donkey Kong Country - Tropical Freeze (USA) (En,Fr,Es) (v1.01).wux"]-renderer.* in /userdata/system/batocera.conf

2023-02-13 22:09:05,154 DEBUG (emulatorlauncher:135):start_rom Settings: {'emulator': 'cemu', 'core': 'cemu', 'hud_support': True, 'videomode': 'default', 'ratio': 'auto', 'video_threaded': False, 'smooth': True, 'shaderset': 'sharp-bilinear-simple', 'rewind': False, 'bezel': 'consoles', 'forceNoBezel': False, 'gamemode_enable': False, 'video_frame_delay_auto': True, 'controllers.bluetooth.enabled': '1', 'controllers.ps3.enabled': '1', 'controllers.ps3.driver': 'bluez', 'controllers.xarcade.enabled': '1', 'controllers.gpio.enabled': '0', 'controllers.gpio.args': 'map=1,2', 'controllers.db9.enabled': '0', 'controllers.db9.args': 'map=1', 'controllers.gamecon.enabled': '0', 'controllers.gamecon.args': 'map=1', 'showFPS': 'false', 'uimode': 'Full', 'emulator-forced': False, 'core-forced': False}

2023-02-13 22:09:05,154 DEBUG (emulatorlauncher:137):start_rom emulator: cemu, core: cemu

2023-02-13 22:09:05,154 INFO (emulatorlauncher:153):start_rom guns disabled.

2023-02-13 22:09:05,295 DEBUG (emulatorlauncher:170):start_rom minTomaxResolution

2023-02-13 22:09:05,295 DEBUG (emulatorlauncher:171):start_rom video mode before minmax: 1920x1080.60.00

2023-02-13 22:09:05,555 DEBUG (emulatorlauncher:177):start_rom current video mode: 1920x1080.60.00

2023-02-13 22:09:05,555 DEBUG (emulatorlauncher:178):start_rom wanted video mode: default

2023-02-13 22:09:05,679 DEBUG (emulatorlauncher:190):start_rom resolution: 1920x1080

2023-02-13 22:09:05,691 DEBUG (Evmapy.py:42):__prepare evmapy on /usr/share/evmapy/wiiu.keys

2023-02-13 22:09:05,698 DEBUG (Evmapy.py:52):__prepare config file for keysfile is /var/run/evmapy/event2.json (from /usr/share/evmapy/wiiu.keys)

/var/run/evmapy/ready MODIFY

2023-02-13 22:09:06,541 DEBUG (cemuGenerator.py:232):CemuConfig *** audio device = alsa_output.pci-0000_00_1b.0.analog-stereo ***

2023-02-13 22:09:06,547 DEBUG (emulatorlauncher:310):getHudBezel hud enabled. trying to apply the bezel consoles

2023-02-13 22:09:06,548 DEBUG (bezels.py:100):getBezelInfos Original bezel file used: /usr/share/batocera/datainit/decorations/consoles/systems/wiiu.png

2023-02-13 22:09:06,555 INFO (emulatorlauncher:336):getHudBezel bezel size read from /usr/share/batocera/datainit/decorations/consoles/systems/wiiu.info

2023-02-13 22:09:06,555 DEBUG (emulatorlauncher:428):getHudBezel applying bezel /usr/share/batocera/datainit/decorations/consoles/systems/wiiu.png

2023-02-13 22:09:06,556 DEBUG (emulatorlauncher:518):runCommand command: XDG_CONFIG_HOME=/userdata/system/configs XDG_CACHE_HOME=/userdata/system/cache XDG_DATA_HOME=/userdata/saves SDL_GAMECONTROLLERCONFIG=030000005e0400008e02000014010000,Microsoft X-Box 360 pad,platform:Linux,b:b1,a:b0,dpdown:h0.4,leftx:a0,lefty:a1,rightx:a3,righty:a4,lefttrigger:a2,leftstick:b9,dpleft:h0.8,rightshoulder:b5,leftshoulder:b4,righttrigger:a5,rightstick:b10,dpright:h0.2,back:b6,start:b7,dpup:h0.1,y:b3,x:b2,guide:b8, SDL_JOYSTICK_HIDAPI=0 MANGOHUD_DLSYM=1 MANGOHUD_CONFIGFILE=/var/run/hud.config LANGUAGE= CONSOLE=/dev/console SHLVL=1 HOME=/userdata/system OLDPWD=/ DBUS_SESSION_BUS_ADDRESS=unix:path=/tmp/dbus-wUZUJLIoSc,guid=c8d25c4ec81cbbb6447f33fa63eaa6e7 INIT_VERSION=sysvinit- _=/usr/bin/emulationstation label=BATOCERA TERM=linux WINDOWPATH=2 BOOT_IMAGE=/boot/linux PATH=/sbin:/usr/sbin:/bin:/usr/bin RUNLEVEL=S XDG_RUNTIME_DIR=/var/run DISPLAY=:0 PREVLEVEL=N LANG=en_US.UTF-8 SHELL=/bin/sh PWD=/userdata LC_ALL=en_US.UTF-8 SDL_RENDER_VSYNC=1 /usr/bin/cemu/cemu -f -g /userdata/roms/wiiu/Donkey Kong Country - Tropical Freeze (USA) (En,Fr,Es) (v1.01).wux --force-no-menubar

2023-02-13 22:09:06,556 DEBUG (emulatorlauncher:519):runCommand command: ['/usr/bin/cemu/cemu', '-f', '-g', '/userdata/roms/wiiu/Donkey Kong Country - Tropical Freeze (USA) (En,Fr,Es) (v1.01).wux', '--force-no-menubar']

2023-02-13 22:09:06,556 DEBUG (emulatorlauncher:520):runCommand env: {'XDG_CONFIG_HOME': '/userdata/system/configs', 'XDG_CACHE_HOME': '/userdata/system/cache', 'XDG_DATA_HOME': '/userdata/saves', 'SDL_GAMECONTROLLERCONFIG': '030000005e0400008e02000014010000,Microsoft X-Box 360 pad,platform:Linux,b:b1,a:b0,dpdown:h0.4,leftx:a0,lefty:a1,rightx:a3,righty:a4,lefttrigger:a2,leftstick:b9,dpleft:h0.8,rightshoulder:b5,leftshoulder:b4,righttrigger:a5,rightstick:b10,dpright:h0.2,back:b6,start:b7,dpup:h0.1,y:b3,x:b2,guide:b8,', 'SDL_JOYSTICK_HIDAPI': '0', 'MANGOHUD_DLSYM': '1', 'MANGOHUD_CONFIGFILE': '/var/run/hud.config', 'LANGUAGE': '', 'CONSOLE': '/dev/console', 'SHLVL': '1', 'HOME': '/userdata/system', 'OLDPWD': '/', 'DBUS_SESSION_BUS_ADDRESS': 'unix:path=/tmp/dbus-wUZUJLIoSc,guid=c8d25c4ec81cbbb6447f33fa63eaa6e7', 'INIT_VERSION': 'sysvinit-', '_': '/usr/bin/emulationstation', 'label': 'BATOCERA', 'TERM': 'linux', 'WINDOWPATH': '2', 'BOOT_IMAGE': '/boot/linux', 'PATH': '/sbin:/usr/sbin:/bin:/usr/bin', 'RUNLEVEL': 'S', 'XDG_RUNTIME_DIR': '/var/run', 'DISPLAY': ':0', 'PREVLEVEL': 'N', 'LANG': 'en_US.UTF-8', 'SHELL': '/bin/sh', 'PWD': '/userdata', 'LC_ALL': 'en_US.UTF-8', 'SDL_RENDER_VSYNC': '1'}

2023-02-13 22:09:30,733 DEBUG (emulatorlauncher:529):runCommand

2023-02-13 22:09:31,747 DEBUG (emulatorlauncher:591):<module> Exiting configgen with status 0

michel83

@nadenislamarre Hello, tested 13/02/23 XU4 version. Sames problems as old version.

libretro flycast and yabasanshiro dont work

Log errors for libretro flycast:

[ERROR] [GL]: GL: Invalid enum.

[ERROR] [Video]: Cannot open video driver … Exiting …

[ERROR] Erreur fatale reçue dans: “video_driver_init_internal()”

log errors for libretro yabasanshiro core:

[ERROR] [EGL]: No EGL configs with appropriate attributes.

[ERROR] [EGL]: #0×3000, EGL_SUCCESS

….

[ERROR] [EGL]: #0×3005, EGL_BAD_CONFIG

[ERROR] [Video]: Cannot open video driver … Exiting …

[ERROR] Erreur fatale reçue dans: “video_driver_init_internal()”

scv libretro core is bugged and unplayable. Can you add zip support in es_system.cfg for svc libretro, please ?

I have tested and it is working with zipped roms.

- cannonball need to have disabled decorations to be properly launched. Is it possible to disable decoration by default for this core only, please ?

Thanks

lbrpdx

@michel83 Thank you. I added .zip for SCV.
I don’t have access to any XU4 so I can’t speak to the emulators crashing. For Cannonball, I think the bug is different: can you please tell me what resolution you are using, and which decoration (it works for me on x86_64 with a 1280:720 screen)? Look at the log file /userdata/system/logs/es_launch_stdout.log you might find out why your bezel isn’t rendered.

michel83

@lbrpdx . I tried again cannonball, i hear sound but graphics are corrupt whatever the resolution. Log error is empty because the emulator is running. The bezel is displayed but black rectangles are displayed on the screen. The only solution is not to display bezels or to play in 640:480. Thank you

alithew

using beta cb7de465c7 2023/02/14 20:40 my logitech f710 stop working. revert back to v35 was ok then again it is not working after reinstalling last beta. the version just before this one was working well.

Edit:Two persons mention that problem on github with other gamepads so I think it will be solved as soon as possible☺

fonzi

Latest beta Feb 17 version for X86 64 has Yabasanshiro core still running slow,despite the HuD saying its 60fps.

Hoping it gets fixed before stable release,or is this to late for v36 stable?

pompyjest

Hello Again, in Beta36 bluetooth controller in pi 4 doesnt works too. Impossible to pairing. t tv

hellodear.in

vedican

oDroid n2+ will not load. It just shows a fun little graphic of a sub with the word “u-boot” under it.
https://en.wikipedia.org/wiki/Das_U-Boot#/media/File:U-Boot_Logo.svg

Left it running for about 10 minutes. Did not move from that graphic.

« Previous Page Next Page »